TixFinDocs

Project settings

Edit the project details and branding, delete a project, choose the shop address, and set up opening hours, sponsors, analytics, support and remote support

9 min read

Project settings hold everything that applies to the whole project rather than to one event. This page covers the sections that are not about your team or money. For those, see Team and roles, Invoicing and Billing and plans.

Where: Project → Project settings, then the section in the tab bar Who can do this: depends on the section, see each one. A section you may not use is not shown.

Edit the project details

Who: Manage project

Open Project settings → Project Details.
Change the Project Name, Description, Location, Timezone, Date range or opening times. The Project Type is read-only.
Under Branding, use Upload image for the Logo and the Banner, or Remove one.
Click Save changes. You see "Project details saved". Reset discards your unsaved changes after asking.
The Project Details tab with name, branding, location and opening times
  1. Project Details
  2. Project Name
  3. Upload image
  4. Save changes
📸 The Project Details tab with name, branding, location and opening times

The logo appears in the sidebar and on project cards. The shop uses it too unless you set a separate logo in the Shop designer.

Delete a project

Who: a project owner, with two-factor authentication

Deleting a project cannot be undone, and it does not cancel orders or refund tickets for you. So TixFin refuses to delete a project while it still has events to come, or while buyers of a cancelled event still hold paid orders. Before you start, cancel the events that are still to come and refund their buyers.

Open Project settings → Project Details and scroll to Delete project. Read what deleting does.
Click Delete project and type the project name exactly as shown.
Hold Hold to delete the project. If your two-factor confirmation is older than ten minutes, enter a code first.

What happens:

  • The project, its members, roles, invitations and plan are deleted at once, and its encryption keys are destroyed.
  • Your TixFin subscription ends. TixFin invoices and payments stay on the closed billing account for the statutory retention period, and sales records are kept for the statutory period.
  • If platform fees are still open, the deletion is refused: they are invoiced right away, and you can delete the project once that invoice is paid. An invoice that is still being paid also holds the deletion until it is settled.

If the deletion is refused, the dialog stays open and tells you why:

  • The project still has events to come. Cancel those events and refund their buyers, then try again.
  • Buyers of a cancelled event still hold paid orders. Refund those orders, then try again.
  • The project's events and orders could not be checked right now. Nothing was deleted; try again later.

You need two-factor authentication set up under Settings → Security. Co-owners and other members do not see Delete project.

Choose your shop address

Who: Manage project or Customize shop design

Open Project settings → Subdomain.
Enter the New subdomain: lowercase letters, numbers and -, at most 63 characters. Preview shows the full address.
Click Save subdomain, then Save and lock for 7 days.
The Subdomain tab with the new subdomain, its preview and Save subdomain
  1. Subdomain
  2. New subdomain
  3. Preview
  4. Save subdomain
📸 The Subdomain tab with the new subdomain, its preview and Save subdomain

After each change the subdomain is locked for 7 days. The page shows Change locked and "Can change again:" with the date. Links to the previous address stop working.

Your own shop domain is listed as a plan capability, but you cannot connect your own domain in the dashboard yet. Emails go out from TixFin's address. Contact support if you need either.

Set opening hours

Who: Manage project

Opening hours with a Friday rule from 22:00 to 04:00 (next day)
  1. Opening Hours
  2. Add Opening Hours
  3. Rule into the next day
  4. Weekly overview
📸 Opening hours with a Friday rule from 22:00 to 04:00 (next day)
Open Project settings → Opening Hours and click Add Opening Hours.
Pick a Day of Week, or leave it empty for a rule that applies to every day. Add a Label if you like, for example "Weekend hours".
Set the opening and closing time and click Add Rule.

A closing time before the opening time means the next day: Friday 22:00 to 04:00 closes on Saturday at 04:00 and shows (next day). The Weekly overview shows the whole week. To delete a rule, click the bin icon and hold the button.

Show sponsors

Who: Manage sponsors

Open Project settings → Sponsors.
Under Project sponsors (global), click Add and enter a Name, a Link and a logo (Upload logo, or a Logo URL). Changes save automatically.
To give one event its own list, choose it under Event sponsors and set Sponsor display to Use event sponsors. Inherit project sponsors uses the global list, Show no sponsors hides them for that event.
The Sponsors tab with project sponsors (global) and event sponsors
  1. Sponsors
  2. Add a project sponsor
  3. Event sponsors
📸 The Sponsors tab with project sponsors (global) and event sponsors

See who visits your shop

Who: View analytics or Manage analytics

Project settings → Analytics shows your shop's Visitors, Sessions, Pageviews, Live users, Bounce rate and Avg session duration for a period and time zone you choose. Below, the Sales Forecast projects sold tickets and revenue per event from the sales so far.

  • Analytics need a shop address. Until you choose one, the page shows Shop domain required with Set up shop domain.
  • Under Visitor tracking you choose whether bots are blocked and whether page changes inside the shop count as page views.
  • Public share link creates a read-only link to the figures you pick (Overview and trend, Top pages, Top referrers), valid for 1 to 365 days, optionally with a password of at least 10 characters. Creating a new link revokes the previous one. Revoke link ends it at once.
The Analytics tab with visitor tracking, the public share link and the sales forecast
  1. Analytics
  2. Visitor tracking
  3. Public share link
  4. Sales Forecast
📸 The Analytics tab with visitor tracking, the public share link and the sales forecast

Send e-mails from your own address

Who: Manage project

Order confirmations, tickets and reminders go out from the platform address until you verify your own sender.

Open Project settings → Mail sender.

Choose Platform relay (we send from your domain) or Own SMTP server (we hand mail to your server). Enter the Sender address and, if you like, a Sender name. For your own server, also enter the SMTP host, the Port (587, 465 or 2525), the SMTP username and the SMTP password, and optionally a DKIM selector.

Click Save sender. The page shows the DNS records to add at your domain's DNS provider; copy each name and value.
Once the records are published, click Check now. The sender is used once Domain ownership, SPF and the other checks pass and the badge says Verified.

The password is never shown again. Leave it empty when you edit other fields to keep it (same host and username only). You can run the check up to ten times an hour. Remove sender switches back to the platform address and destroys the stored password.

A verified mail sender with its DNS records and the sender settings
  1. Platform relay or own SMTP
  2. Save sender
  3. Copy the DNS records
  4. Check now
  5. Verified
📸 A verified mail sender with its DNS records and the sender settings

Set up support tickets

Who: Manage and close support chats

In Project settings → Support Tickets you define the Statuses and Priorities your team uses for support tickets. A priority can carry a Response SLA, a Resolution SLA, a reminder and an escalation target. Switch on Buyer support chat to let ticket buyers open a support chat from their ticket page. You answer chats under Operations → Support Chat.

Support Tickets in the project settings with the Buyer support chat switch, Statuses and Priorities
  1. Support Tickets
  2. Add status
  3. Add priority
  4. Buyer support chat
📸 Support Tickets in the project settings with the Buyer support chat switch, Statuses and Priorities

Approve remote support

Who: Manage project

A TixFin support agent can only look into your project after you approve their request.

Before an agent can send a request, they ask you for your Project Code (on the project overview) and a support code:

Open Project settings → Remote support and click Generate support code under Support code.
Confirm with Generate. Your second factor may be asked for again. Any earlier support code stops working at once.
Read the code to the agent or click Copy code. It is shown only this once; generate a new one next time.

Then approve the agent's request:

Open Project settings → Remote support. A request appears under Waiting for your decision with the agent's Stated reason.
Tick the areas the agent may see, for example Events or Billing.
Choose the Duration and click Approve, or click Deny.

Access never lasts longer than two hours. A request you leave unanswered lapses after 15 minutes. End access now stops an active session after you confirm; to look again, the agent has to ask for a new approval. Every approval and denial is recorded under Earlier sessions.

Common problems

  • A check stays open after you added the DNS records. DNS changes can take a while to propagate. Try Check now again later.

  • "Too many requests." on Check now: you ran the check ten times in the last hour. Wait and try again.

  • "Only lowercase letters, numbers and '-' are allowed" Remove capitals, spaces and other characters from the subdomain.

  • The subdomain field is locked. You changed it less than 7 days ago. The page shows when you can change it again.

  • "Opening and closing time must not be the same." Choose different times. For a rule past midnight, enter the closing time of the next morning.

  • "This was refused." when approving remote support: you lack the permission, or you have not confirmed your second factor in the last ten minutes. Sign out, sign in again with your second factor and try again.

On this page